G-ZKEW0FNREB
Maxplug 25 Kg stops running water instantly
Maxplug
Maxplug
Drizoro Maxplugh gif

DRIZORO MAXPLUG Stops Running Water

Price range: $87.00 through $315.00

MAXPLUG quick setting hydraulic cement from Drizoro that instantly stops running water from cracks, holes or other openings in concrete and masonry. MAXPLUG is non-shrink and sets within 3-5 minutes.

Supplied as a powder – just add water and mix.
Coverage: 1kg fills approx. 620cm3.

Free Delivery Australia wide for orders over $1100.

SKU: PLUG25 Categories: , , Tags: , , , , , , , , Brand:

Description

Discover the power of Drizoro branded products, your ultimate solution for waterproofing and protection. With Drizoro branded products, you’re not just buying a product; you’re investing in peace of mind. Our range of high-performance solutions ensures that your structures remain durable and secure against water damage, corrosion, and environmental wear. From sealing cracks to waterproofing basements, Drizoro products deliver unmatched quality and reliability. Don’t let water compromise your investments. Choose Drizoro Maxplug stops running water leaking quickly as an expanding hydraulic cement, safeguarding your structures for years to come.

How to Use Drizoro MAXPLUG to Stop Active Leaks – Video Summary

This video shows Drizoro MAXPLUG rapid-setting water stop mortar stopping an active leak in a concrete block wall. MAXPLUG is a single-component cementitious mortar that stops running water in 60-90 seconds, even under hydrostatic pressure.

Key steps from the video:

1. Prepare: Open the leak to 20mm wide x 20mm deep. Wear gloves — MAXPLUG is exothermic and heats up.
2. Mix: Mix 1kg MAXPLUG with ∼0.22 litres of water (about 3 parts powder to 1 part water) for 30 seconds. Mix only what you can use in 1 minute. Do not mix with drill — hand mix.
3. Apply: Form a dry plug with your gloved hand and press FIRMLY into the leak. Hold pressure for 90 seconds. Do NOT smooth or overwork it.
4. Finish: After 15 minutes, cut back any excess. For permanent waterproofing, coat over MAXPLUG with 2 coats of MAXSEAL FLEX M or MAXSEAL FOUNDATION within 24 hours.
5. Coverage: 1.5kg of MAXPLUG fills approx 1 litre of void. A 5kg tin stops 3-4 typical active leaks.

When to use MAXPLUG vs MAXREST:

Use MAXPLUG where water is actively running. Use MAXREST where surface is damp but not running. For flexing cracks in tanks, use MAXPLUG then MAXJOINT ELASTIC. EXPRESS

Need help calculating? Call Ian 0466 797 900 — 30+ years experience.

USAGES:

Drizoro Maxplug Stops Running Water & Seal Leaks Instantly In Concrete Surfaces And Solid Masonry, For Emergency Repairs On Water Pipes. For Broken Pipes, Maxplug Will Even Work When The Pipes Are Under Pressure, Emergency Plugging Of Gas Leaks

A Quick Setting Hydraulic Cement That Instantly Stops Running Water From Cracks, Holes Or Other Openings In Concrete And Masonry. Non-Shrink And Sets Within 3-5 Minutes. Supplied As A Powder – Just Add Water And Mix. 1Kg Fills Approx. 620Cm3.

Online Waterproofing Shop are Australian Stockists for quality branded Mortar products and offer the Maxplug.

Use Maxplug as part of a waterproofing system with other Drizoro construction products
Drizoro Maxseal | Drizoro Maxrest | Maxjoint Elastic

Drizoro Maxplug stops running water leaking quickly as an expanding hydraulic cement, Maxjoint Elastic express used with hydraul expand cement

Now offered throughout Australia with the finest quality products at the lowest prices.

As authorised agents and distributors of Drizoro products, Online Waterproofing Shop gives tradies access to competitive direct-from-the-warehouse trade pricing available*.

Buy with confidence from a trusted Australian supplier, with outstanding value on professional-grade products. Contact us today to discuss your trade pricing.

Promotion: Shop where the professionals get their quality products from and save with delivery Australia Wide.

✓ Suppliers of quality and accessories.

This Quality product is offered at prices to suit every budget. We have many more sale offers for you to choose from.

✓ Offered on sale.

Get the job done right with Drizoro Maxplug stops running water —now available with fast delivery Australia-wide. Whether you’re a builder, contractor, plumber or waterproofing professional, our trade customers can access great deals on high-quality waterproofing products while saving time and money.

The Maxplug is now on sale at the special trade price and it does not get better that this. Shop with confidence at Online Waterproofing Shop

✓ Shipping.

Free Delivery Australia wide where Order Exceeds $1100. Orders below will have a small delivery charge of $95 including GST.

✓ Exchange Policy.

Damage to stock delivered must be reported to driver immediately Exchanges accepted on items returned in original condition up to 5 days from delivery.
See our Exchange or Returns detail.

✓ Stock.

Drizoro Maxplug is usually in stock. Occasionally product high demand effects availability.

✓ Manufacturers Warranty.

All our Drizoro products come with a full manufacturers warranty.

✓ Everyday Specials.

Big Brands, Everyday Low Prices with Special Discounts on selected items from time to time. Sign up for our newsletter or follow us on social media for updates

Shop with confidence at Online  Waterproofing Shop where only the finest quality products are promoted and equipment shipped direct from our Distribution Centre. If you are happy with your purchase, tell a friend.

How to seal leaking concrete tanks using Drizoro Maxplug expanding hydraulic cement

Waterproofing solutions using Drizoro Maxplug expanding hydraulic cement among others

Drizoro Maxplug gif Protecting building structure by stopping flowing water instantlyDRIZORO MAXPLUG Stops Running Water

Drizoro Maxplug stops water leaks under pressure in minutes

Check out this page Drizoro Products .. all compatible with Drizoro Maxiplug

Additional information

Weight 25 kg
Weight

1 Kg, 5 Kg, 25 KG
Price

30, 87, 315

Maxplug Wall Floor Leak

How DRIZORO MAXPLUG fixes active water leaks instantly – #risingdamp

How DRIZORO MAXPLUG fixes active water leaks instantly – https://onlinewaterproofingshop.com/product/drizoro-maxplug/ – If you’re searching for How DRIZORO MAXPLUG fixes an active water leak then watch this video to learn everything you need to know about How DRIZORO MAXPLUG fixes active water leaks instantly

When sealing against a column, wall slab joint and manholes make sure you remove any buildup of slime or efflorescence. Scrabbling and perhaps water blasting before attempting to place the Maxplug.

Note the pipe being used to allow easier placement of the MaxiPlug
Try and form a coving at the intersection of the wall slab/column as the coving allows better flexibility at the intersection

Technical Info

Drizoro Construction Products

DRIZORO MAXPLUG Stops Running Water shown here

MAXPLUG

Quick-setting hydraulic mortar that stops leaks under pressure

A rapid-setting cement-based repair mortar for stopping running water
through cracks, holes and openings in concrete, masonry and other sound
substrates.

Shop MAXPLUG | Technical data

Product highlights

  • Starts hardening within seconds
  • Sets in approximately 3–5 minutes
  • Can set under water
  • Slightly expansive and non-shrink
  • Contains no chlorides
  • Suitable for emergency leak repairs

Product description

MAXPLUG is a quick-setting cement-based mortar that instantly stops
running water from cracks, holes and other openings in concrete,
masonry and sound substrates.

It is supplied as a grey powder and requires only water for mixing.
MAXPLUG begins hardening within a few seconds and normally sets within
three to five minutes, depending on temperature and conditions.

Its mechanical properties are comparable to concrete and, in some
cases, may be superior. The product is designed to set under water
and does not contain chlorides.

Advantages

  • Stops water under pressure quickly.
  • Does not shrink after application.
  • Slightly increases in volume as it sets.
  • Can be applied with a trowel, spatula or by hand.
  • Setting time can be influenced with warm or cold water.
  • Useful for domestic, commercial and industrial maintenance.

Applications

Concrete and masonry leaks

Seal active leaks in concrete surfaces, solid masonry and other sound
substrates.

Emergency pipe repairs

Suitable for emergency repairs to broken water pipes, including
situations where water remains under pressure.

Basements and tunnels

Stop water penetration in basements, tunnels, sewers, lift shafts,
pools and water-retaining structures.

Slab-to-wall connections

Form waterproof coves at floor and wall junctions and cold concrete
joints.

Anchoring

Anchor bolts, metal fixtures and other accessories requiring rapid
use.

Emergency plugging

Can be used for emergency plugging of gas leaks. Follow all relevant
safety procedures and seek professional assistance.

How to use MAXPLUG

1 Prepare the surface

Remove all loose material. Cracks should generally have a minimum
depth of approximately 40 mm and an opening of 30–40 mm. Cut the
opening into a square or preferably dovetail shape. Avoid a V-shaped
cut. Wet the surface if there is no active water present.

2 Mix a small quantity

Mix only the amount that can be applied within approximately three
minutes. For an active leak, mix only the quantity that can be held
and applied by hand.

3  Add water gradually

Use a clean plastic or rubber container. Add water slowly until the
mixture reaches a cement-mortar consistency. Approximately 0.28 litres
of water is required for each kilogram of MAXPLUG, depending on
conditions.

4  Apply immediately

Apply using a trowel, spatula or gloved hand. Do not pour the material
into the opening. For cracks under high pressure, work in small
sections rather than attempting to plug the entire crack at once.

Important:
MAXPLUG sets rapidly. Prepare only the amount that can be applied before
it begins to harden.

Temperature and curing

At approximately 18–20°C, normal setting time is three to five minutes.
In warm conditions, use cold water to delay setting. In extreme heat,
keep the product in the shade and use ice in the mixing water.

Tools and cleaning

Clean tools immediately with water after use. Once the material has
hardened, it can generally only be removed mechanically.

Important installation guidance

Leaks in cracks or joints

Prepare the crack to a depth of approximately 50 mm and remove loose
concrete. Apply MAXPLUG in small amounts by hand. Wait until the
material becomes warm, apply it firmly, remove excess material
immediately and continue along the crack.

Concrete slabs and walls

For floor-to-wall junctions, create an opening of at least 20 × 30 mm
and form a waterproof cove using MAXPLUG.

Expansion joints

MAXPLUG becomes rigid when set and is not the ideal final material for
joints subject to continuous movement. It may be used to stop water,
after which the joint should be recreated with a suitable flexible
joint sealant.

Anchoring

MAXPLUG can be used to anchor bolts and metal fixtures into concrete
where rapid setting is required.

Technical data

Age Flexural strength
(kp/cm²)		 Compressive strength
(kp/cm²)
30 minutes 12 38
3 days 37 225
7 days 57 362
28 days 52 407

Consumption

One kilogram fills approximately 0.615–0.620 litres, depending on the
amount of water used. This is approximately 615–629 cm³ per kilogram.

Packaging

Available in 5 kg cans and 25 kg drums.

Storage

Up to 36 months in unopened containers when properly transported and
stored.

Mixing ratio

Approximately 0.28 litres of clean water per kilogram of product,
subject to site and weather conditions.

Safety information

MAXPLUG is a cement-based abrasive material. Wear protective rubber gloves
when mixing and applying the product.

If material enters the eyes, rinse thoroughly with clean water and do not
rub. If irritation continues, seek medical attention. Refer to the
product Safety Data Sheet before use.

Do not mix MAXPLUG with other materials.
Use a clean and dry trowel when removing product from the container.
Mixing with other materials may alter its characteristics.

Stop active leaks quickly

Order MAXPLUG from Online Waterproofing Shop or contact the team for
product selection and technical guidance.


Visit the online shop

The information above has been adapted from the MAXPLUG technical bulletin supplied by the manufacturer/distributor. Always read the current product label and Safety Data Sheet before use. Product suitability depends on the substrate, water pressure, site conditions and application details.

 

 

MAXPLUG FAQs - Stopping Active Leaks

MAXPLUG FAQs – Stopping Active Leaks

1. Can Drizoro MAXPLUG stop an active water leak under pressure?

Yes. MAXPLUG is a rapid-setting water stop mortar that stops active leaks in 60-90 seconds, even under hydrostatic pressure. It is designed for negative side waterproofing where water is actively running through concrete, concrete block, or masonry.

2. How do you mix and apply MAXPLUG?

Mix 1kg of MAXPLUG with 0.22 litres of clean water (approx 3 parts powder to 1 part water). Mix by hand for 30 seconds only. Wear gloves — it heats up (exothermic reaction). Form a plug and press firmly into the leak and hold for 90 seconds. Do not smooth. Use mixed material within 1 minute.

3. What is the coverage of MAXPLUG?

1.5kg of MAXPLUG fills approximately 1 litre of void. A 1kg tin will stop 1 small leak. A 5kg tin will stop 3-4 typical leaks. For larger honeycombs or voids, open to 20mm x 20mm before plugging.

4. Do I need to coat over MAXPLUG after stopping the leak?

Yes, for permanent waterproofing. MAXPLUG is a temporary water stop. Within 24 hours, coat over it with 2 coats of Drizoro MAXSEAL FLEX M or MAXSEAL FOUNDATION. For flexing cracks, use MAXJOINT ELASTIC after MAXPLUG.

5. Can MAXPLUG be used in potable water tanks?

Use MAXPLUG to stop the active leak, then overcoat with MAXSEAL FLEX or MAXSEAL FOUNDATION which are AS4020 approved for potable water contact. MAXPLUG on its own is not the final potable coating.

6. What is the difference between MAXPLUG and MAXREST?

Use MAXPLUG when water is actively running or leaking. Use MAXREST when the surface is damp but not running, for structural concrete repairs and concrete cancer (spalling) repairs. Both are part of the Drizoro system.

7. How long does MAXPLUG last and how should I store it?

Unopened, 12 months in dry conditions. Once mixed, sets in 60-90 seconds. Once applied and overcoated with MAXSEAL, it becomes part of the permanent Drizoro waterproofing system with a 10-year material warranty when applied as per data sheet. Free delivery Australia-wide over $1100 — dropshipped from Australian distributor.

Related products

Drizoro Maxpatch Repair of Industrial Concrete FloorsDrizoro Maxpatch repair of industrial concrete floorsMaxQuick RollDrizoro MaxQuick Roll Cement Based Waterproof Render