Description
Discover the power of Drizoro branded products, your ultimate solution for waterproofing and protection. With Drizoro branded products, you’re not just buying a product; you’re investing in peace of mind. Our range of high-performance solutions ensures that your structures remain durable and secure against water damage, corrosion, and environmental wear. From sealing cracks to waterproofing basements, Drizoro products deliver unmatched quality and reliability. Don’t let water compromise your investments. Choose Drizoro Maxrite 700 repair damaged concrete, waterproof at the same time and safeguard your structures for years to come.
Spray Application of Maxrite 700
USAGES: Drizoro Maxrite 700 repair damaged concrete
- Maintenance of industrial areas damaged by aggressive environments, acid rain, atmospheric pollution, etc.
- Structural concrete repair. Which is due to damage by corrosion of reinforcements. In the marine environment, bridges, harbours, dams, etc
- Repair of concrete structures with carbonation in process.
- Repair of damaged concrete by deicing salts, freeze/thaw cycles, mechanical impacts, etc.
- Concrete repair is affected by repeated loads.
- Repair of prefabricated concrete elements.
Advantages of Drizoro Maxrite700 to repair damaged concrete
- Corrosion inhibitors prevent corrosion against chlorides and aggressive corroding agents, extending considerably the service life of the structure.
- Its open setting time allows the quick completion of the repair of large surfaces.
- Good chemical resistance in aggressive environmental ambient due to its microsilica content.
- Waterproof.
- Withstands freeze/thaw cycles.
- Offers high resistance to carbonation penetration.
- High adhesion to concrete and reinforcements.
- Does not require special primers.
- The transmitted Load onto the repaired structure.
- High impact and mechanical strength.
- Long-lasting repairs.
- Good thixotropy.
- Application in successive layers without slump or the need to use formwork.
- Allows high thickness per layer.
- Easy workability and application. Repairs to damaged concrete can be completed by spray. Use of the wet method.
- Single component mortar. Only requires water for mixing and it is odourless,
- Suitable for poorly ventilated areas such as tanks.
Spraying Texture Trowel
APPLICATION INSTRUCTIONS
Preparation of the surface:
Mixing:
Quantities are only indicative, onsite testing for the desired consistency and the existing ambient conditions.
Application:
Apply the layers between 5 and 50 mm thick.
Trowel on the Maxrite mortar whilst pressing with the trowel. This prevents any air entrapment.
Application conditions:
Do Not Apply when –
- at a temperature below 5 °C.
- When lower substrate or ambient temperatures (<5°C) are expected during the 24 hours following the repair.
Curing:
Cover the repairs during the first 24 hours. Especially when temperatures are above 30ºC and the relative humidity is below 50%.
Cleaning:
CONSUMPTION:
One 25 kg. sack of Drizoro Maxrite®700 fills approximately 13.75 litres
IMPORTANT CAUTIONS
Should the slurry primer dry or the previous layer is completely set. Apply a new slurry coat to continue the job.
DO NOT use
- any Drizoro Maxrite 700 leftovers to prepare a new batch.
- mixing methods that are too violent.
- over mixed product or mix for prolonged periods.
- curing compounds on the repair.
- never exceed the thickness per layer in the application.
- exceed the amount of mixing water recommended.
Setting time is measured at 20 ºC.
Higher temperatures reduces setting time.
Lower temperatures delays setting time.
For any other application not specified in this technical bulletin consult our Technical Department.
PACKAGING
Drizoro Maxrite 700 25Kg Bag, direct from our warehouse with shipping Australia Wide.
STORAGE
Twelve (12) months in bags and eighteen (18) months in drums and cans, in their original unopened packaging, in a dry and covered place, protected from frost and humidity with the temperature above 5 ºC.
TECHNICAL DATA
Tests, generally after 28 days Mixing water:- 15%
SAFETY AND HEALTH
Non Shrink, High Early Strength, Thixotropic, Normal Setting, Polymer Modified, Fibre Reinforced, Structural Repair Mortar With Corrosion Inhibitors
Online Waterproofing Shop are Australian Stockists for quality branded Sealer products and offer the Maxrite 700
Now offered throughout Australia, this guarantees that you get the finest quality products at the lowest prices.
As agents and distributors of Drizoro branded products, at Online Waterproofing shop you can be sure of getting the best trade prices direct from our wholesale warehouse. Enhance your life with the Maxrite 700 and save at the same time, Now offered with fast delivery throughout Australia guaranteeing great value. We always ensure that you get the lowest prices for the best quality products available nation wide.
Promotion: Shop where the professionals get their quality products from and save with delivery Australia Wide.
✓ Suppliers of quality and accessories.
This Quality product is offered at prices to suit every budget. We have many more sale offers for you to choose from.
✓ Offered on sale.
The Maxrite 700 is now on sale at the special trade price it does not get better that this. Shop with confidence at Online Waterproofing Shop
✓ Shipping.
Free Delivery Australia wide where Order Exceeds $1100. Orders below will have a small delivery charge of $95 including GST.
✓ Generous Exchange Policy.
Exchanges accepted on items returned up to 30 days from delivery. See our Exchange or Returns detail.
✓ Stock.
This product is currently in stock. See checkout for final availability.
✓ Manufacturers Warranty.
All our Drizoro products come with a full manufacturers warranty.
✓ Everyday Specials.
Big Brands, Everyday Low Prices with Special Discounts on selected items.
