Maxrest Passive Corrosion Protection Reo

$32.50$790.00

maxrest-passive-drizoro-logoTechnical Brochure | MSDS 

Oxide converter and corrosion protection for reo/ reinforcing bars in structural concrete repairs providing

  1. Oxide converter and corrosion protection for reo/ reinforcing bars in structural concrete repair exposed to aggressive conditions such as in coastal areas, industrial environments, etc.
  2. Anti-corrosion protection against the attack from strong chemical agents such as diluted alkali and acid solutions.
  3. Adhesion promoter on metal surfaces for subsequent coating systems.
Clear

Description


  • maxrest-passive-drizoro-logo-corrosion protection reo
    Oxide Converter And Anti- Corrosion Protection Reo /Reinforcing Bars And Other Iron Or Steel Surfaces

Technical Brochure | MSDS 

Description

Drizoro Maxrest®Passive is a one-component liquid product, ready to use as an oxide converter and corrosion protection for reo / re-enforcing bars and other steel and iron surfaces against corrosion.

Once applied Drizoro Maxrest®Passive  neutralizes the corrosion process, reacting quickly with the rust and transforms iron oxide into a stable passive layer giving full protection against corrosion, salts, acid and alkali attack.

Applications for Drizoro Maxrest®Passive

  • Oxide converter and corrosion protection reo / re-enforcing bars in structural concrete repair exposed to aggressive conditions such as in coastal areas, industrial environments, etc.
  • Anti-corrosion protection against the attack from strong chemical agents such as diluted alkali and acid solutions.
  • Adhesion promoter on metal surfaces for subsequent coating systems.drizoro-maxrite-700-with-corrosion-inhibitor-fibre-reinforced-cementitious-mortar-repairs-concrete-cancer

Advantages of Maxrest Passive

  1. Excellent adhesion on metal substrate for rebar corrosion protection.
  2. It even adheres to steel which has been sandblasted to white metal. Or over only partially rusted surfaces.
  3. Water-based liquid, solvent-free and non-flammable.
  4. One-component product, easy and ready to use.
  5. Quick drying, allows a fast repair job.

 

Drizoro Maxrest®Passive rebar corrosion protection
Application Instructions

Surface preparation

Clean down affected area by wire brush, sandblasting or water blasting and wash with clean water. Remove any dust, oil and grease.

Method of Rebar Corrosion Protection

Drizoro Maxrest®Passive comes ready to be used; it does not require dilution or addition of other materials. Applied by brush, spray gun. Where convenient  by immersing the element to be protected. Apply two coats, the second one when the first coat is dry to touch (between 2 – 3 hours at 20ºC). Avoid staining the concrete around the reinforcement. Extra coats of Maxrest®Passive can be applied when required.

Do not apply corrosion protection if these conditions exist:

  1. if temperatures below 5 ºC is expected within 24 hours.
  2. when rainfall is expected within 24 hours.
  3. on frosted or frozen surfaces.

Curing

Corrosion Protected Reo, with Maxrest® Passive, can be over coated with other epoxy or polyurethane coatings 24 hours after application.

Cleaning

Clean with water all tools and equipment immediately after use. Once it hardens, product can only be removed by mechanical methods.

Consumption

Estimated consumption of Drizoro Maxrest®Passive is 0,15 kg/ m2 per coat, for a dry film thickness of 50 microns, in order to achieve a total consumption of 0,3 kg/m2 in two coats. Consumption may vary depending on texture and surface conditions, a preliminary test on-site will determine consumption exactly.

Maxrest Passive -corrosion protection for reoPackaging

Rebar corrosion protection product Drizoro Maxrest®Passive is supplied in 500 gram, 1kg, 25kg and other amounts on application.

Storage

Twelve months in its original unopened packaging, in a dry covered place, protected from humidity and frost with temperatures above 5 ºC.

Safety And Health

Drizoro Maxrest®Passive is not a toxic product but skin and eye contact must be avoided.

During application use safety goggles and protective gloves. In case of skin contact, wash affected areas with soap and water. In case of eye contact rinse thoroughly with clean water but do not rub. Seek medical attention if irritation persists.

Safety Data Sheet for Drizoro Maxrest®Passive  is available by request.

Disposal of the waste product and packaging:-  is the responsibility of the final user. Disposal method must meet official regulations.

Technical Data

corrosion protection, corrosion protection reo, rebar corrosion protection, drizoro-maxrest passive-with-corrosion-inhibitor-reinforced steel rust protection

 

 

 

 

 

 

 

 

 

If your looking for the best Corrosion Protection Reo then Drizoro Maxrest Passive certainly will give best corrosion protection reo will certainly be your first choice for rebar corrosion protection.

 

 

 

 

 

 

Guarantee The information contained in this leaflet is based on our experience and technical knowledge, obtained through laboratory testing and from bibliographic material. Drizoro®, S.A. reserves the right to introduce changes without prior notice. Any use of this data beyond the purposes expressly specified in the leaflet will not be the Company’s responsibility unless authorised by us.
We shall not accept responsibility exceeding the value of the purchased product.

The data shown on consumptions, measurement and yields are for guidance only and based on our experience. This data is subject to variation due to the specific atmospheric and jobsite conditions so reasonable variations from the data may be experienced. In order to determine the correct coverage data. Conduct a test on the jobsite. The client responsibility. We shall not accept responsibility exceeding the value of the purchased product. For any other doubt, consult our Technical Department.

Additional information

WeightN/A
Weight

1 Kg Tub, 10 Kg Pail, 2 Kg Pail, 20 Kg Pail, 5 Kg Pail, 500 gram

You may also like…