Description
Discover the power of CMA branded products, your ultimate solution for waterproofing and protection. With CMA branded products, you’re not just buying a product; you’re investing in peace of mind. Our range of high-performance solutions ensures that your structures remain durable and secure against water damage, corrosion, and environmental wear. From sealing cracks to waterproofing basements, CMA products deliver unmatched quality and reliability. Don’t let water compromise your investments. Choose CMA Easybond for Permanent Formwork like Dincel or Rediwall to bond tiles an more to your walls and safeguard your structures for years to come.
Easy Bond for Permanent Formwork USES
A cementitious key coat bonding bridge on Permanent Formwork i.e. DINCEL, REDIWALL, and ZEGO. Non-porous surfaces such as (powder coated) metal, shipping containers or any other PVC-based walling system.
Provides an excellent base for the application of renders, paints, tiles and stonework
Benefits of Easy Bond
Provides a base coating suitable for substrates subject to
- Thermal movement.
- Environmentally friendly and suitable for application in poorly ventilated areas.
- Acts as an anti-fracture membrane between the substrate and other finishing coats
- Does not require a primer, scuffing or sandblasting. This saves labour costs.
- Up to 15 years life expectancy (depending on the application area and usage)
APPLICATION INSTRUCTION
Surface Preparation
The surface to be coated must be. Sound, clean, and free of all traces of paint, dust, grease, efflorescence, loose particles, gypsum, plaster and mould release compounds. Holes, voids, honeycombs and cracks, once opened to a minimum of 2 cm in Drizoro Maxrest
Exposed steel bars must be cleaned and patched with Drizoro Maxrest (Technical Bulletin no. 4) with 1 cm. a minimum thickness.
If the steel bar is corroded, treat it with the oxide converter Drizoro Maxrest Passive (Technical Bulletin no.12). Thoroughly wash down and saturate the substrate with plenty of water. Remove all free-standing water before the application of Drizoro Maxrest.
Apply EASY BOND by Texture or foam roller or broom Spreading a homogeneous and continuous coating of 1 mm approximately.
Once applied. do not:- 1. overwork the surface. 2. do not apply to a painted surface.
Allow a drying time of a minimum of 3 days.
For large areas:- EASY BOND can be sprayed. When sprayed, comb the fresh Coat with a broom to make sure that the whole surface is covered homogeneously.
On fissures, concrete joints, corners and cracks, once repaired, apply the first coat of EASY BOND at 1,0 Kg /m² and while it is still fresh, place Drizoro Maxmesh either 50 mm or 200 mm roll.
Mixing:
A 20 kg bag of EASY BOND requires 6 – 6.3 litres of water (20 ± 2 %), depending on application temperature and substrate conditions. Pour the required amount of water in a clean container, and slowly add EASY BOND mixing by a slow speed electric drill (400-600 rpm) fitted with a disc mixer for about 2-3 minutes until achieving a lump-free and homogeneous mix.
Allow the mixture to rest for 2 to 3 minutes to fully wet out all the powder, and then remix briefly before applying. To keep the workability of the fresh mortar, remix again briefly, but do not add more water. Do not mix product that cannot be applied within 20 – 30 minutes.
Curing
Curing time for putting into service is 3 days, at 20ºC and 50% R.H
Cleaning.
Clean all tools immediately after use with water. Removal, once cured, is by mechanical methods.
EasyBond PACKAGING
Supplied in 20 Kg bags, available in grey.
STORAGE
Twelve months in its original unopened packaging, in a dry and covered place protected from humidity, frost and direct sunlight, at temperatures above 5 ºC.
IMPORTANT CAUTIONS:
Do not add cement, admixtures, sand or any other compound.
In case of doubt related to the kind of water to be in contact with EASY BOND or other uses not specified in this Technical Bulletin, consult Technical Department.
CAUTION:
We do NOT recommend the use of EASY BOND over ZINC or ZINC coated surfaces, treat these surfaces using Drizoro Maxrest Passive as per TDS prior to coating.
SAFETY AND HEALTH
EASY BOND is an abrasive compound so protective rubber gloves and goggles must be used during application. In case of eye contact, rinse thoroughly with clean water, but do not rub. In case of skin contact, wash affected areas with soap and water. If irritation continues, seek medical attention.
Special Caution:
Applying a single heavy or large cladding ensures the correct adhesive is used.
Apply adhesive to the entire surface, do not spot apply.
Limit single weight to 20 Kg. If an item/m² exceeds this, also use fixing anchors.
TECHNICAL DATA
Product characteristics
Description. One component cement based Mortar.
General appearance and colour | Grey powder
Density, (g/cm3) | 1,12 ± 0,1
Mixing water, | (%) 20-22
Application and curing conditions
Minimum application temperature for substrate and ambient, (ºC) > 5
Pot life at 20 ºC & 50 % R.H., (min) 20 – 30
Minimum / Maximum drying time between coats at 20 ºC & 50 % R.H., (h) | 6
Curing time at 20 ºC & 50 % R.H.(hrs)r:
– Mechanical load: covering with gravel, renders, plasters, tiles | 24
– Water immersion days | 3
Cured product characteristics
Permeability to water vapour, EN ISO 7783-1/-2. Classification | Class I: Permeable to water vapour
V (g/m2·day) / S (m) | 13,7 / 1,6
Permeability to water and capillary absorption, EN 1062-3. w (kg/m2·h0,5) | 0,005
Permeability to CO, EN 1062-6. S (m) | 64
Crack-bridging capability, UNE-EN 1062-7 | Class A3 (>0,5 mm)
Adhesion on concrete at 28 days, EN 1542 (MPa) Adhesion to steel | >4.0 >4.0
Consumption*
Consumption per coat/total application, (kg/m2) | 1 – 2
* These figures are for guidance only and may vary depending on porosity, substrate conditions and application method. Perform a preliminary test on-site to ascertain the total exactly under job site conditions
EASY BOND coating for all PVC Permanent Formwork systems is ideal for Dincel & Rediwall and more
EasyBond 20Kg, direct from our warehouse with shipping Australia Wide.
One- Component Cement- Based Mortar. Mixed With Only Water Provides A High-Performance Flexible Bonding Bridge For Non-Porous Substrates
Online Waterproofing Shop are Australian Suppliers for quality branded Adhesive products and offer the Easy Bond
Now offered throughout Australia this guarantees that you get the finest quality products at the lowest prices.
As agents and distributors of CMA branded products, at Online Waterproofing shop you can be sure of getting the best trade prices direct from our wholesale warehouse. Enhance your life with the EasyBond and save at the same time, Now offered with fast delivery throughout Australia guaranteeing great value. We always ensure that you get the lowest prices for the best quality products available nation wide.
Promotion: Shop where the professionals get their quality products from and save with delivery Australia Wide.
✓ Suppliers of quality and accessories.
This Quality product is offered at prices to suit every budget. We have many more sale offers for you to choose from.
✓ Offered on sale.
The Easy Bond is now on sale to the trade at special price. It does not get better that this. Shop with confidence at Online Waterproofing Shop
✓ Shipping.
Free Delivery Australia wide where Order Exceeds $680. Order below will have a small delivery charge of $65 including GST
✓ Generous Exchange Policy.
Exchanges are accepted on any items reported as damaged to the delivery driver, Unfortunately, damage or non-performance reported at a later date will require further investigation before any refunds. See our Exchange or Returns detail.
✓ Stock.
This product is currently in stock. See checkout for final availability.
✓ Manufacturers Warranty.
All our CMA products come with a full manufacturers warranty.
✓ Everyday Specials.
Big Brands, Everyday Low Prices with Special Discounts on selected items.
