Description

Technical Brochure | MSDS | Specifications | Video 

WATMAT Quick Setting Mortar For Levelling Manhole Covers And For Repairs For Immediate Use.

Drizoro Watmat quick setting mortar for levelling manholes, factory mixed with special cements, silica and additives. It is ready for use for levelling newly constructed manholes and urgent repairs to factory floors.

  Drizoro Watmat A Quick Setting Levelling Mortar

7 Advantages You get when using Drizoro Watmat

1. For emergency repairs and resetting manhole covers on streets, public roads and concrete factory floors.
2. Traffic can pass over the repair within two hours of application.
3. Just mix with water.
4. The addition of MAXCRYL to the mixing liquid produces an even stronger mixture.
5. It adheres well to the substrate and its grey colour blends in with the concrete.
6. It is non-toxic and odourless which makes WATMAT an ideal product for areas with poor ventilation.
7. Waterproof. Very low water absorption.

Application

HOW TO USE Drizoro Watmat – Quick setting mortar for levelling

Surface preparation: The concrete substrate should be free from all loose particles, dirt, grease, oil or other contaminants. To achieve this, the surface should be bush hammered or grit-blasted so as to expose good clean sound concrete.

Application and mixing:

For vertical patching and repair work, Drizoro Watmat can be mixed with clean water and trowel applied. However, for a high performance finish and floor treatments, the inclusion of MAXCRYL into the mixing water at a rate of 1 part MAXCRYL to 3 parts water is necessary.

Quick Setting Mortar:

Once mixed to a mortar consistency, Drizoro Watmat can take from 5 to 20 minutes to set, according to the climatic and surface temperatures. Trials should be carried out to establish that whatever quantities you mix can be applied before the material starts to set.

Mixing: Mix the required amount of Drizoro Watmat with clean water. As a guide, 25 Kgs. of WATMAT require between 4.3 and 4.6 litres of water.

Application: Mix the required amount of Drizoro Watmat, place it around the perimeter of the hole, place the levelling tool on top and inside.

Replace the manhole cover after 20 minute. then finish the final asphalt coat.

Cleaning: Clean Tools and equipment immediately after use with water. Once set, can be only removed by mechanical methods.

CONSUMPTION

The estimate consumption of WATMAT® is approximate 1,7 kg/ m2 / mm thickness. One kg fills approximately 0,59 litres of volume.
Approximately 25 kg bag fills a 5 cm level in 1m diameter hole.

CAUTIONS for when using quick setting Drizoro Watmat

• Do not apply at temperatures below 5º C or on freezing surfaces.
• Do not re-use previously mixed amounts of Drizoro Watmat.
• Use only clean water for mixing and cleaning preparation.
• Do not mix Drizoro Watmat with other products.
• Do not re-temper/re-mix.

 

---

TECHNICAL DATA

click to enlarge

More technical details available in the Watmat Technical Brochure 

---

 

• Drizoro Watmat is Quick setting mortar for levelling around gatic covers in floors and roadway where vehicular access is required ASAP – Drizoro Watmat is fully trafficable in 2 hours

Sealing Sewer Access Chambers – Manholes

 

Drizoro Maxseal Traffic – Trafficable Waterproof Coating for concrete floors

 

---

 

https://onlinewaterproofingshop.com/product-category/quick-setting-mortar/