Waterproofing External or Internal Masonry Walls

Bricks, Cement Blocks, Concrete, Render etc.

Drizoro Construction products required for how to waterproofing external or internal masonry walls – Bricks, Cement Blocks, Concrete, Render etc.

Drizoro Maxrest | Drizoro Maxseal Flex | Drizoro Maxseal Foundation | Drizoro Maxseal Family | Drizoro Maxjoint Elastic  | Drizoro Maxmesh | Drizoro Maxplug | Concreseal Plaster or Pool

Method

1. Preparation: Remove all loose materials from the area to be treated.  Ensure area is clean and sound surface.
2. Remove efflorescence with Efflorescence Rid
3. Repair any damaged surfaces with Maxrest.
4. Replace any Missing mortar lines or concrete. Use Maxrest or Maxjoint Elastic if movement is required.
5. Thoroughly wet the entire surface before applying the coating by brush or broom.
   a. Use Maxseal Flex or Maxseal Flex M on previously treated surfaces. Or surfaces subject to movement.
   b. Use Maxseal Foundation where there are no previous coatings.  NO movement is expected.
   C. All products require two coats.
6. Use DRIZORO products as the finish coat, alternatively paint, tile, cement, or acrylic render as required.
7. Apply a flick coat of 3 parts cement to 1 part washed crushed river sand and allow to dry prior to cement rendering.
8. If Efflorescence is present contact the office before the application of the waterproofing membrane

For further info contact us

When applying Maxseal Traffic in a trafficable make sure the surface is not too wet. Water should not be ponding on the surface

He is example the use of a bonding bridge or intercoat. Apply Easy Bond to the Dincel wall. Maxseal Flex waterproofs the surface. Then surface is tiled over. Use Drizoro Makola to fix the tiles

Shopping mall tunnel roof product Maxseal Flex