Description
Discover the power of CMA branded products, your ultimate solution for waterproofing and protection. With CMA branded products, you’re not just buying a product; you’re investing in peace of mind. Our range of high-performance solutions ensures that your structures remain durable and secure against water damage, corrosion, and environmental wear. From sealing cracks to waterproofing basements, CMA products deliver unmatched quality and reliability. Don’t let water compromise your investments. Choose CMA 100 Ultra Clearseal Waterproofs Concrete for Life safeguarding your structures for years to come.
USAGES: CMA 100 Ultra Clearseal
Because of its ability to withstand thermal stress and its super-fast application, CMA100® Clearseal is particularly suitable for areas of exposed concrete such as:
- Car Parks
- Wharfs
- Rooftops and podium decks
- Marine Structures
- Bridge decks
- Pre-cast Panels
- Landscaped areas
- Driveways
Reacts With Calcium To Form A Water Insoluble Calcium Silicate Hydrate Gel That Seals The Cracks, Pores And Capillaries Of The Concrete. Seals Cracks In The Concrete Up To 2.2 mm. And With Most Mix Designs Will Remain Reactive In The Concrete To Seal Future Hairline Cracks On Contact With Water.
Spray CMA100® waterproofing onto FULLY cured concrete. As a Liquid CHS waterproofing it forms a barrier inside the concrete: waterproofs and protects the concrete from corrosion and degradation for the design life of the structure.
Why Use CMA100 ClearSeal?
- CMA100® ClearSeal waterproofs for the life of the structure
- Permanently seals static cracks up to 2.2mm
- Seals future hairline cracks on contact with water with most mix designs
- Protects against water, chloride and sulphate ingress; increases resistance to chemical attack
- Hardens concrete to a higher level (9 of Mohs scale) than granite (6-8 Mohs Scale=140MPA)
- Increases the bond of concrete to cementitious materials by 80%
- Does not require a screed
- Coating is not damaged by other trades on site
- Trafficable 2-6 hours after application
- Suitable for ponding water
- Non-toxic. Suitable for use with potable water
- No re-application needed for years to come
- Straightforward one coat application. No bonding issues as occurs with many other membranes
- Environmentally friendly. May earn LEED points.
- Cost effective
- The super-fast application ensures faster project completion and saves $$$
APPLICATION: Equipment
Application is by low pressure sprayers such as a backpack sprayer, or motorised pump, depending on the size of the project.
SUPER FAST APPLICATION
Typically, one person with a backpack sprayer can apply 1000m² per day and with a motorised pump can apply about 6000m² per day.
Compare this to a membrane where one person can typically apply not more than 100m2 per day.
CMA100® is suitable for use on both horizontal and vertical surfaces.
Coverage
In general, usage will be around 1 litre to 5 square metres, however, this will vary according to the MPa and finish of the concrete.
High MPa concretes with a smooth finish may only use 1 litre to 6 square metres, whilst low MPa concretes with open pores may use 1 litre to about 4 square metres.
APPLICATION GUIDELINES:
APPLICATION METHOD
- CMA100® is suitable for use on properly vibrated structural concrete with a minimum of 20MPa.
- Apply at temperatures above +5°C. For application at temperatures above +40°C, contact CMA Technical Department for specific instructions.
- Prior to CMA100® application, remove any honeycombing by chipping out, applying CMA100 and filling with mortar.
- Apply to clean, dry, cured concrete.
- Remove materials that will retard penetration such as curing compounds etc
- Apply CMA100® until the concrete will accept no further product. If there are cracks, apply additional product at approximately 1 litre to 3 lineal metres.
For large or difficult cracks apply DRIZORO Maxjoint Elastic Express the surface is touch dry (generally 2- 5 hours depending on climate), water abundantly.
CMA100 “loves” water and provided the product has soaked into the concrete it cannot be over-watered. - 24 hours after the first watering, water again very generously.
- 48 hours after the first watering, water again very generously.
- After application, the area can be ponded to verify performance.
IMPORTANT NOTE:
The product MUST be watered within 6 hours of initial application, or it may not perform to specification and may need to be re-applied.
APPLICATION TO VERTICAL SURFACES
Apply as per the instructions above. However, instead of one coat at 1 litre to 5m², do two coats at the rate of 1 litre to 10m².
Apply the first coat at 1 litre to 10m² then, before the product has dried, apply the second coat, also at 1 litre to 10m².
This prevents excess product from running down the wall and the end result is coverage at 1 litre to 5m².
IMPORTANT CAUTIONS:
- Apply only to properly vibrated structural concrete of 20MPa and above.
- Any materials, including some curing agents that prevent penetration of CMA100® into the concrete, must be removed prior to application.
- CMA100® is not suitable for sealing structural/working/volatile cracks or those caused by mechanical damage.
- Most CMA Approved Applicators offer a waterproofing system. Where cracks are present that CMA100® is unable to seal. They are be treated with an ancillary products (Drizoro Maxjoint Elastic Express). Consult your local distributor for details.
- CMA100® is not recommended for negative side waterproofing. Where waterproofing from the negative side is required. Use DRIZORO MAXSEALFLEX.
- Do not spray CMA100® onto glass, aluminium, wood or painted surfaces or etching may occur. Should contact occur, immediately rinsing thoroughly with water may minimise the etching.
- Design Detailing: CMA100® is not suitable for sealing where segregations and voids are likely, such as design cracks, expansion joints and penetrations. Use CMA100® with DRIZORO MAXJOINT ELASTIC EXPRESS. Consult your local distributor for details.
- Pour structural slabs to fall where possible. No screed is required, saving time and money compared to membranes.
- It is BEST practice to seal all Floor/Wall joints using DRIZORO Maxseal Flex and embed Maxmesh.
FAQS CMA 100
- How long has the product been available and tested?
Has been sold for over 20 years
- Will the product cause any discolouring over time (from the sun or for other reasons) such as , for example, yellowing?
No discolouration
How long is it expected the product will last and what is the warranty or guarantee and can it be reapplied in future years without any difficulty or complications?
Lifetime warranty
- Will cleaning the driveway by water pressure cleaning be a problem after application of the product?
Not affected by pressure cleaning
- Will the product once applied increase the slipperiness in any degree of the driveway in wet or dry conditions to vehicles or pedestrian traffic?
NO effect
- Can I only order the product from you online or do you have a location near me that I could collect it?
ONLINE from this website delivery to site
- Once the container is opened for use how long will the balance of the product in the container last?
Indefinitely.
PACKAGING
Available in 5 litre, 10 litre, 20 litre and 200 litre
SHELF LIFE / STORAGE
Stir before use. CMA100® Ultra Clearseal has no known shelf life but must be kept in a sealed container and out of direct sunlight. Store between 1°C and 60°C. Do not freeze.
SAFETY
Take adequate precautions, such as wearing protective gloves and using breathing apparatus if applied in enclosed environments. Avoid contact with the skin and eyes. If contact is made, especially with the eyes, flush with lots of water.
Refer to Safety Data Sheet.
TECHNICAL DATA
Colour
Clear to slightly opaque liquid TESTING SHEET Specific Gravity
Range 1.2 – 1.3 PROPERTIES STANDARD RESULT Voc
Zero Water Permeability EN1062:3 70% Reduction Boiling Point
101°C Chlorine Permeability ASTM C1202-19 Very low pH
11.3 Depth of Penetration EN1504:2 Exceeds Standard Toxicity
Non-Toxic Concrete Hardness EN101 Grade 9 of Mohs scale (Granite is 6-7) Non-volatile solids
25 – 27% Slip Resistance change EN1303-6:2011 No change Flammability
Not applicable Bond to cementitious materials (pull-off test) EN1542:199 80% Increase
WaterProof Your Slab by Adding CMA ADMIX to the Concrete Mix
Online Waterproofing Shop are Australian Suppliers of quality branded Penetrating Saturant products and offer the CMA 100 Ultra Clearseal.
Now offered throughout Australia with the finest quality products at the lowest prices.
As agents and distributors of CMA branded products, at Online Waterproofing shop you can be sure of getting the best trade prices direct from our wholesale warehouse. Enhance your life with the CMA 100 Ultra Clearseal and save at the same time, Now offered with fast delivery throughout Australia guaranteeing great value. We always ensure that you get the lowest prices for the best quality products available nation wide.
Promotion: Shop where the professionals get their quality products from and save with delivery Australia Wide.
✓ Suppliers of quality and accessories.
This Quality product is offered at prices to suit every budget. We have many more sale offers for you to choose from.
✓ Offered on sale.
The CMA 100 Ultra Clearseal is now on sale at the special trade price and it does not get better that this. Shop with confidence at Online Waterproofing Shop
✓ Shipping.
Free Delivery Australia wide where Order Exceeds $800. Order below will have a small delivery charge of $65 including GST
✓ Generous Exchange Policy.
Exchanges accepted on items returned up to 30 days from delivery. See our Exchange or Returns detail.
✓ Stock.
This product is currently in stock. See checkout for final availability.
✓ Manufacturers Warranty.
All our CMA products come with a full manufacturers warranty.
✓ Everyday Specials.
Big Brands, Everyday Low Prices with Special Discounts on selected items.
