Drizoro Maxseal Cementitious Waterproofing seals against hydrostatic pressureDrizoro Maxseal Flex FAQ’s

Question

What Drizoro Maxseal Membrane should I use if there is constant contact with water? 
This basically in retaining structures such as pools, tanks or anywhere there is the likelihood of movement in the structure and fine cracking.

Answer:

Use Drizoro Maxseal Flex wherever the membrane is to be permanently underwater.

Question

Can I add colouring agents to the Drizoro Maxseal products?

Answer:

Maxseal Flex – Component A (the liquid) is tinted using water-based tints applied to acrylic paints. The maximum amount of tint is 0.8 litre per 10 litres (8% by volume).

Question

Can Maxseal membranes be applied both as waterproofing and aesthetic finishing?

Answer:

YES – limited by your imagination, Brush cross coats, swirls, bagged, texture roller final coat, spray applications

Question

Can I apply Drizoro Maxseal products to a dry surface?

Answer:

NO – see the next question

Question

Can I apply Drizoro Maxseal products to a WET surface?

Answer:

YES – but not so wet that water is running off the surface

Question:

When you have applied the Drizoro Maxseal Flex how long can you leave it before you pebblecrete over?

Answer:

Treat Maxseal products like a normal concrete surface. Apply Maxseal products to fresh or green concrete. This application will improve curing.
If your coating e.g. If the manufacturer recommends that you wait for 28 days curing of the fresh concrete. We recommend you wait for the same period of time before applying your finish, in this case, pebblecrete.

Question

Drizoro Maxseal Flex FAQ's, Painted Wall with Vapour Causing Bubbles in Textured Paint Finishes, Leaking Garden bubbling Paint

I have some bubbles on my existing rubberoid membrane, should I burst the bubbles or paint over them

Answer

Drizoro Maxseal Flex or any of the Maxseal cementitious membranes are designed to be applied to masonry surfaces.
Once the water has penetrated such membranes they slowly delaminate so painting over the bubbles will do nothing to improve the integrity of your current membrane. The only way to repair using Maxseal is to completely remove the rubberoid membrane and apply Drizoro Maxseal Flex

 

Searching for answers Drizoro Maxseal Flex FAQ’s provides some

Need more info call or email us

Comments are closed.